DieselShip's Online Content Library

Q1. As Second Engineer of a new ship,

A. Prepare standing orders for all future bunkering operations onboard;

B. State why it is very important to obtain a representative sample of heavy fuel bunkers taken.

C. State how a representative sample is obtained;

Q4. A. Draw a plan to deal with fire in accommodation, including co-ordination with shore facilities in port, taking account of the ship’s fire control plan;

B. Explain how drills and practices should be-organized with reference to the above.

Q1. Describe the relationship between frictional resistance and

(a) Ship’s speed;

(b) the wetted area;

(c) surface roughness;

(d) The length of the vessel.

Q4. Give a pragmatic approach to dealing with a sea water leakage, which is flooding the engine room and which has the potential of causing a serious impairment to a vessels stability.

Q9. A) As Second Engineer of a new ship, prepare standing orders for all future bunkering operations;

B.  State why it is very important to obtain a representative sample of heavy fuel bunkers taken and explain how a representative sample is obtained

C. What information is provided in bunker Delivery note (BDN).

Q6. With reference to an automatic water sprinkler, fire detecting alarm and extinguishing system for accommodation spaces: -

A. (i) Sketch a typical system;

(ii) Describe the operation of this system;

B. State the sources of water available;

C. Describe the sprinkler head and its operation;

D. State how the temperature rating of the sprinkler head is determined.

Q9. A. List the factors that determine the starting torque of the three-phase induction motor. How does this torque generally compare with the value of the rated torque?

B. The low-voltage release of an a.c. motor-starter consists of a solenoid into which an iron plunger is drawn against a spring. The resistance of the solenoid is 35 ohm. When connected to a 220 V, 50 Hz, a.c. supply the current taken is at first 2A, and when the plunger is drawn into the “full-in” position the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger.

Q6. A. Describe the normal criteria used for setting thermal protection relays and its advantage compared to magnetic types.

B. The low-voltage release of an a.c. motor-starter consists of a solenoid into which an iron plunger is drawn against a spring. The resistance of the solenoid is 35 ohm. When connected to a 220 V, 50 Hz, a.c. supply the current taken is at first 2A, and when the plunger is drawn into the “full-in” position the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger.

Q5. With reference to air receivers and bottles explain with reasons: A. Why regular systematic internal inspection is advisable? B. Which internal areas of large receivers should receive particularly close examination? C. How bottles are inspected internally and what parts should be closely examined? D. How the condition of a bottle or receiver that cannot be inspected internally is checked?

Q6. With regard to keeping the gas side of boilers in good condition discusses EACH of the following:

A. the mechanism of combustion, stating the factors which are important to good combustion;

B. Oil fuel treatments;

C. Soot removal equipment;

Q4: An auxiliary engine exhibits a tendency to hunt to such an extent that the engine speed variation prohibits the connection of the machine to the switchboard. (a) Discuss the possible causes of hunting. (b) Explain how the problem of hunting can be rectified.

Q7. With reference to the 4-stroke medium speed engines:

A. Define the cause and effect of thermal stressing in cylinder Heads, liners and pistons.

B. Explain why thermal stressing are aggravated with increase in cylinder bore.

C. Explain how stress concentration and its effects are relieved by maintenance and operational practices.

Q5. With reference to Boiler water tests carried out onboard:

A. Discuss the possible reasons for the following changes in boiler water test results, and state what actions should be taken in each case;

1. Reduction in total dissolved solids and chemical reserves.

2. Reduction in phosphate reserve, with increase in chlorides and total dissolved solids;

3. Reduction in alkalinity reserve only.

4. Increase in oxygen levels only.

B. State why the complete results of boiler water tests are logged or entered into a data retrieval system rather than a note being made of any particular result which may be outside set limits.

Q8. A. Explain the action of EACH of the following metallurgical mechanism:

(i) Creep;          (ii) Brinelling;   (iii) Fretting;     (iv) Fretting corrosion;

B .State, with reasons, where EACH of the mechanisms in occur in ship propulsion System.

Q4. With reference to hydraulic steering gears, sketch and describe each of the following: (A)Single failure concept;

(B)100 Percent redundancy.