DieselShip's Online Content Library

Q3. Differentiate between squirrel cage and wound rotor motor of the three phases: a.c. induction. In respect of the following; A. Rotor construction, B. Torque characteristic, C. Speed variation.

Q5. With reference to an emergency source of electrical power in cargo ships: -

A. Describe a typical power source.

B. Give a typical list of essential services, which must be supplied simultaneously;

C. Explain how the emergency installation can be periodically tested.

Q3. The direct online start of squirrel cage motor is used for most electrical drives on a.c. powered ships. Describe with sketches as necessary one method of overcoming each of the following Problems:

A. High starting current; B. Low starting torque.

Q4. A. (i) Discuss the various hazards and problems which are associated with electric cable Insulation in the event of fire.

(ii) Suggest remedies for these problems.

B. State how the spread of fire may be reduced by the method used for installing electric cables.

Q5. A. What are the causes of overheating of an induction motor?

B. What preventive measures are provided against damage to an induction motor in installed condition? C. What is the purpose of ‘fuse back up protection’ provided to an induction motor? D. How does an induction motor develop torque?

E. What is the condition to be satisfied for achieving maximum running torque in an induction motor?

Q6. A. What are the characteristics of PN junction diode? Point out its specifications. Also point out the significance of dynamic and static resistances.

B. Draw the circuit of Half-wave rectifier and its output waveform. A diode whose internal resistance is 20 is to supply power to 1000 load from 110 V (RMS) source. Calculate

(i) peak load current, (ii) DC load current, (iii) AC load current.

Q7. A. Describe the no-load saturation characteristic of a d.c. generator.

B. A d.c. motor takes an armature current of 110 A at 480 V. The resistance of the armature circuit is 0.2 . The machine has six poles and the armature is lap-connected with 864 conductors. The flux per pole is 0.05 Wb. Calculate;

(i) The speed;

(ii) The gross torque developed by the armature.

Q8. A. What is a commutator? Discuss its rectifying action in detail.

B. Calculate the e.m.f. generated by a 4-pole, wave wound armature having 40 slots with 18 conductors per slot when driven at 1000 r.p.m. The flux per pole is 0.015 wb.

Q9. A. Discuss different methods of speed control of a d.c. series motor by adjusting field ampere turns.

B. A 230 V, d.c. shunt motor runs at 1000 r.p.m and takes 5 amperes. The armature resistance of the motor is 0.025𝛀 and shunt field resistance is 230𝛀. Calculate the drop in speed when the motor is loaded and takes the line current of 41 amperes. Neglect armature reaction.

Q10. A. Why is a synchronous motor not self-starting? What are the various ways in which it can be started?

B. A 500V, single phase synchronous motor gives a net output mechanical power of 7.46kW and operates at 0.9 power factor lagging. Its effective resistance is 0.8 . If the iron and friction losses are 500 w and excitation losses are 800w, calculate the armature current and the commercial efficiency.