DieselShip's Online Content Library

Q1. Suggest a procedure (in about 200 words) to the Chief Engineer, as to how you propose to ensure that the engine room overhead crane is maintained and operated correctly.  What tests certificates are required for the overhead crane, and who is the issuing authority.

Q7. Fatigue is one of the main causes of crankshaft failure - A. Indicate on a sketch the most likely location of a fatigue crack; B. Explain how a fatigue failure is identified; C. Describe how a fatigue crack may be initiated; D. Describe, with the aid of sketches, the methods used to inhibit fatigue cracks.

Q4. An auxiliary engine exhibits a tendency to hunt to such an extent that the engine speed variation prohibits the connection of the machine to the switchboard. A. Discuss the possible causes of hunting; B. Explain how the problem of hunting can be rectified.

Q8. For a fully automatic provisions refrigeration system incorporating a number of rooms; A. Explain how each room temperature is set;  B. Describe the sequence of events following a demand for increased refrigerant flow from one room;  C. State with reasons the devices incorporated into the system to protect the machinery and equipment against malfunction;  D. State how satisfactory operation of the plant can be established?

Q6. Under Continuous survey of machinery (CSM) bottom end bearing of a large 2stroke slow speed engine is due for survey.

A. As second engineer, explain the procedure involved in complete inspection of a bottom end bearing.

B. List the precaution to be taken.

C. Indicate the reasons for possible defects which could be encountered and state how they may be rectified.

D. What test are carried out on completion of survey and re-assembly.

Q6. A. State the circumstances owing to which it may be necessary to renew a cylinder liner.

B. Explain how the liner is removed

C. Explain how the new liner is fitted; State the important checks to be made before and after fitting.

Q7. Describe the procedure to be undertaken when, upon a routine schedule for changing fuel injectors on a main engine, It is found that the injector body is seized and cannot be removed by conventional means. How to ascertain whether the cylinder head injector can be used satisfactorily.

Q8. Explain how EACH of the following hull defects should be dealt with;

(a) A cracked weld;

(b) A severe indentation in way of a frame;

(c) Surfaces suffering from general corrosion although the extent of wastage does not warrant plate replacement;

(d) A bilge keel fractured at the forward end.