DieselShip's Online Content Library

Q8. A. What are the factors which determine the synchronous speed of a motor?

B. Three conductors fitted side by side in the stator of a salient-pole alternator. Each generates maximum voltage of 200V (sinusoidal). The angle subtended at the centre of the stator between adjacent conductors is 20 electrical degrees. If the three conductors are connected in series, find

(i) the r.m.s. value of the effective voltage and

(ii) the ‘breadth factor’. Using the theory that is the basis of this problem, give one reason why three-phase current has been introduced.

Q9. A. List the factors that determine the starting torque of the three-phase induction motor. How does this torque generally compare with the value of the rated torque?

B. The low-voltage release of an a.c. motor-starter consists of a solenoid into which an iron plunger is drawn against a spring. The resistance of the solenoid is 35 ohm. When connected to a 220 V, 50 Hz, a.c. supply the current taken is at first 2A, and when the plunger is drawn into the “full-in” position the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger.

Q6. A. Describe the normal criteria used for setting thermal protection relays and its advantage compared to magnetic types.

B. The low-voltage release of an a.c. motor-starter consists of a solenoid into which an iron plunger is drawn against a spring. The resistance of the solenoid is 35 ohm. When connected to a 220 V, 50 Hz, a.c. supply the current taken is at first 2A, and when the plunger is drawn into the “full-in” position the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger.

Q4. With reference to preferential tripping in a marine electrical distribution system.

A. With the aid of a sketch, describe a typical arrangement to provide three stages of tripping an instantaneous protection against short circuit.

B. State why this protection is required;