DieselShip's Online Content Library

Q9: What in your view are the ideal requirements for lifeboat engine? Are they spelt out anywhere in SOLAS 74? Are these engines certified by any authority?

Q3. The fire protection provided for the propulsion motor and generator of a diesel electric drive vessel is usually one of the following methods:

a. Fixed foam extinguisher;                   b. Fixed CO2 system;

c. Steam smothering system;                 d. Dry Chemical Powder.

Briefly state in a comparative analysis, how each one of these methods has some disadvantages when used with propulsion system as stated above.

Q1. A. (i) discuss the various hazards and problems which are associated with electric cable insulation in the event of fire;

(ii) Suggest remedies for these problems.

B. State how the spread of fire may be reduced by the method used for installing electric cables.

Q5. With reference to oil monitoring of bilge and tanker ballast discharges:

A. Describe with the aid of a sketch the general arrangement of an oil monitoring system;

B.  State the inputs that are recorded;

C. Explain the difficulties encountered with the efficient operation of the monitoring systems.

Q3. Explain the principle of port State control and give in detail the verification the Port State Control Officer may carry out with particular reference to the following;

A. Emergency generator; B. Auxiliary steering gear; C. Lifeboat engine; D. Bilge pumps; E. SOPEP.

Q9. With reference to chemical tankers:

A. Sketch a suitable cargo pumping and stripping system, labelling the component parts and indicating the direction of fluid flow;

B.  State the requirements of the regulations involved to reduce pollution of the sea by chemical tanker cargoes.

Q7. As Second Engineer of a ship, what steps you will take to familiarize the engine room staff with their respective duties and also to combat an emergency on board?

Q8. You have joined a vessel as a Second Engineer, which is about to undertake a six-month round voyage. Describe the key issues that you will attend and provide guidance to juniors towards proper Planned Maintenance of Engine Room and associated areas under ISM Codes.

Q2. With reference to classification society’s survey, explain the following

A. Why a Class certificate is issued to a newly built ship after satisfactory completion of survey and sea trials, what is the purpose of a Class certificate?

B. Is it necessary to call a Class surveyor after repair or alteration to the ship’s structure If so, why?

C. Describe the requirement for initial and periodical survey respect to International Load Line.