DieselShip's Online Content Library

Q4. A. Describe a method of the attachment of bilge keels;

B. State THREE reasons for not extending bilge keels the entire length of the vessel;

C. Evaluate the effectiveness of bilge keels for large wall sided vessels;

D. Explain TWO principles of roll damping those bilge keels exploit.

Q3: With reference to dry docking, define the responsibility of the second engineer;

A. Prior to docking;

B. Whilst the vessel is in dry dock;

C. Prior to flooding and leaving the dock.

Q1. With reference to International Load Line Statutory Certification,

A. State the reasons for the freeboard requirements;

B. (i) Explain the term “conditions of assignments”;

(ii) List the items that may be examined during a Load line survey after a vessel’s major repairs in the dry-dock.

Q2. State how and why the following machinery items are effected when the maximum service speed of a Vessel is consistently maintained in heavy weather.

A. Intermediate shafting,

B. Propeller shafting,

C. Shafting coupling bolts,

D. Main thrust pads.

Q2. A. Describe the arrangement made in a main structural bulkhead for a watertight door aperture; B. Explain a procedure for ensuring that sliding watertight doors are operated safely. C. Differentiate between the categories of watertight door and state the regulation pertaining each type.

Q6. A. Explain the term angle of loll and state what, if any dangers it poses to a vessel. B. A ship whose length is 110 m has MCTI cm 55 tonne m: TCP9; LCF 1.5 m forward of midships and floats at draughts of 4.20m forward and 4.45m aft. Calculate the new draughts after the following masses have been added, 20 tonne 40 m aft of midships; 50 tonne 23 m aft of midships; 30 tonne 02 m aft of midships; 70 tonne 06 m forward of midships; 15 tonne 30 m forward of midships;

Q7. A. Explain what is meant by ‘assigned summer free board’. B. A ship 120m long has draughts of 6.6m forward and 6.9 aft. The TPC is 20, MCTI cm 101 tonne m and the centre of flotation 3.5m aft of midships. Calculate the maximum position aft at which 240 tonne may be added so that the after draught does not exceed 7.2m

Q1. A. Explain the purpose of the rudder carrier and pintles.

B. The speed of a ship is increased to 18% above normal for 7.5 hours, and then reduced to 9% below normal for 10 hours. The speed is then reduced for the remainder of the day so that the consumption for the day is the normal amount. Find the percentage difference between the distance travelled in that day and the normal distance travelled per day.

Q7. A. Describe the effect of cavitation’s on the propeller blades.

B. A propeller 4.6m diameter has a pitch of 4.3m and boss diameter of 0.75. The real slip is 28% at 95 rev/min. Calculate the speed of advance, thrust and thrust power.

Q8. A. Describe the stability requirements of a ship for dry-docking.

B. A ship 130m long displaces 14000 tonne when floating at draughts of 7.5m forward and 8.10m aft. GML – 125m, TPC – 18,LCF-3m aft of midships. Calculate the final draughts when a mass of 180 tonne lying 40m aft of midships is removed from the ship.