DieselShip's Online Content Library

Q3. A. Explain what is meant by permissible length of compartments in passenger ships;

B. Describe how the position of bulkheads is determined.

C. Describe briefly the significance of the factor of subdivision.

Q5. Explain how the period of roll varies with –

A. The amplitude of roll;

B. The radius of gyration;

C. The initial metacentric height;

D. The location of masses in the ship.

Q10. A. Describe the relationship between frictional resistance and: (i)Ship speed; (ii) the wetted area; (iii) surface roughness; (iv) The length of the vessel.  B.A ship travels at 15 knots and has a QPC of 0.865 with a delivered power of 2600 KW. The apparent slip is 5% and the real ship is 28%Calculate the total resistance and the wake friction.

Q2. If a ship is seriously damaged under water in way of a large fuel side bunker tank what is the immediate effect and what may ultimately happen? What features in the ship would enhance safety?

Q5. Explain what is meant by "Dynamical Stability";

Explain how the area under the GZ curve represents dynamical stability for a ship;

Q6. A box-shaped pontoon is 36 meters long, 4 meters wide and floats in salt water at drafts F-2.00m, A-4.00m. Find the new drafts if the pontoon now passes into fresh water.

Q7. A. Explain how to distinguish between list and loll and describe how to return the ship to the upright in each case. B. A ship 120m long has a light displacement of 4000 tonne and LCG in this condition 2.5m aft of midships.  The following items are then added:

Using the following hydrostatic data, calculate the fine draughts:

Q1. A. Explain the purpose of the rudder carrier and pintles.

B. The speed of a ship is increased to 18% above normal for 7.5 hours, and then reduced to 9% below normal for 10 hours. The speed is then reduced for the remainder of the day so that the consumption for the day is the normal amount. Find the percentage difference between the distance travelled in that day and the normal distance travelled per day.

Q9. A. Describe the general precautions to be taken against capsizing. State the recommended criteria for passenger and cargo ships.  B. The ½ ordinates of a water plane at 15m intervals, commencing from aft, ar. 1, 7, 10.5, 11, 11, 10.5, 8, 4 and 0m. Calculate: i. TPC; ii. Distance of the centre of flotation from midships; iii. C. Second moment of area of the water plane about a transverse axis through the centre of flotation.

Q10. Describe with sketches the arrangement of a power operator sliding water light door. B. A watertight bulkhead 7.5m high has vertical stiffeners 0.75m apart, connected at the bottom by brackets having 10 rivets 20mm diameter in each arm. The bulkhead is flooded to the top on one side only with seawater calculate. (i) Shearing force at top and bottom; (ii) Position of zero shear; (iii) Shear stress in the rivets; Draw the load and shearing force diagrams.