DieselShip's Online Content Library

Q2. Sketch a high-lift safety-valve lid and seat detailing their special features. Describe how such a valve is overhauled and any clearance that should be measured and noted. (16)

Q4. A. Describe with the aid of sketches where necessary a vane type steering gear showing how to weight of the rudder and stock are carried and the arrangement that allow for wear down;

B. State how the vanes described in (A) are secured and the method of sealing the edges;

C. State how, if necessary, the steering gear is locked for rudder maintenance.

Q3. What do you understand by ‘safematic steering gear’ and how does it work?

Q9. With reference to fatigue of engineering components:

A. Explain the influence of stress level at cyclical frequency on expected operating life.

B. Explain the influence of material defects on the safe operating life of engineering component.

C. State the factors which influence the possibility of fatigue cracking of an auxiliary boiler feed water pump shaft and explain how the risk of such cracking can be minimized.

Q6. With respect to tankers describes: - (16)

A. How a pump room is ventilated?

B. How cargo tanks are ventilated?

C. Cargo tank protection as per SOLAS 1974.

D. Additional alarms provided for inert gas systems of the ‘inert gas generator’ type.

Q3. A. Sketch and describe TWO methods that employ manometric means for measuring tank contents. (6)

B. State what corrections are made to the readings obtained by the methods described in (A) in order to gauge the mass contents? (5)

C. Explain how bunkering requirements may be estimated when no records of main engine fuel consumption are available on board. (5)

Q7. Describe the possible faults which may be found during a dry-dock inspection of the following; A. Stern frame; B. Sea chest; C. Bilge keel; D. Anodes; E. Rudders.

Q8. With reference to oil/water separators:

A. Describe with the aid of a sketch, the working of such a separator. (6)

B. Explain the consequence if the interface detector position is incorrect. (5)

C. Enumerate the various possibilities by which oil / water interface can be moved. (6)

Q8. A. State the advantages of using steam turbine propulsion power for vessels carrying LNG cargo. B. With regard to the use of L.N.G. cargo as boiler fuel explain: (i)The safety precautions relating to the gas pipeline supplying the boiler and burning the gas in the boiler, (ii) The means of getting rid of “excess gases” during loading or discharge.