DieselShip's Online Content Library

Q4. Give a pragmatic approach to dealing with a sea water leakage, which is flooding the engine room and which has the potential of causing a serious impairment to a vessels stability.

Q6. With reference to an automatic water sprinkler, fire detecting alarm and extinguishing system for accommodation spaces: -

A. (i) Sketch a typical system;

(ii) Describe the operation of this system;

B. State the sources of water available;

C. Describe the sprinkler head and its operation;

D. State how the temperature rating of the sprinkler head is determined.

Q6. A. Explain the principles underlying the STCW Convention;

B. Explain how as a senior engineer you would implement the regulation for controlling and monitoring of minimum hours of rest for watch keepers;

C. What type of specific shipboard familiarization is required to be given to a seafarer new to a particular type of vessel?

Q9. A. List the factors that determine the starting torque of the three-phase induction motor. How does this torque generally compare with the value of the rated torque?

B. The low-voltage release of an a.c. motor-starter consists of a solenoid into which an iron plunger is drawn against a spring. The resistance of the solenoid is 35 ohm. When connected to a 220 V, 50 Hz, a.c. supply the current taken is at first 2A, and when the plunger is drawn into the “full-in” position the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger.

Q6. A. Describe the normal criteria used for setting thermal protection relays and its advantage compared to magnetic types.

B. The low-voltage release of an a.c. motor-starter consists of a solenoid into which an iron plunger is drawn against a spring. The resistance of the solenoid is 35 ohm. When connected to a 220 V, 50 Hz, a.c. supply the current taken is at first 2A, and when the plunger is drawn into the “full-in” position the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger.

Q3. A. Explain why it is necessary to have reverse power protection for alternators intended for operation.

B.(i) Sketch a reverse power trip; (ii) Explain briefly the principle on which the operation of this power trip is based and how tripping is activated.

Q2. With reference to U.M.S. operations:

A. State with reasons the essential requirements for unattended machinery spaces;

B. As second Engineer, describe how you would respond to the irretrievable failure of the Machinery space fire alarm system whilst the ship is on voyage.