DieselShip's Online Content Library

Q1. Draw and describe the construction of a forepeak tank. Explain how are the effects of panting and pounding taken care with help of neat sketches?

Q2.A. Describe the arrangement of tank top and double bottom in the machinery space making particular reference to the structure and scantlings below the main engine.

B. Show the method adopted in the arrangement of D.B. tanks to avoid contamination of fresh water, fuel oil and lube oil stored in D.B. tanks.

Q3. A. Explain what is meant by permissible length of compartments in passenger ships;

B. Describe how the position of bulkheads is determined.

C. Describe briefly the significance of the factor of subdivision.

Q1. (a) What is significance of the area under the curve of statical stability or the GZ curve? Explain using a neat diagram, how this curve is used to assess the stability of the ship against a heeling arm.

(b) In a grain carrier, how the shifting of grain affects the curve of statical stability. With a neat diagram explain the existing minimum criteria for stability of grain carrying ships. (8).

Q4. With reference to Underwater Inspection in lieu of Dry  docking (UWILD)

A. Explain in detail, how an underwater survey is carried out;

B. State the requirements to be fulfilled before an underwater survey is acceptable to the survey authority.

C. Construct a list of the items in order of importance that the underwater survey authority should include.

Q7: An oil tanker 160m long and 22m beam floats at a draught of 9m in seawater. Cw is 0.865. The midships section is in the form of a rectangle with 1.2m radius at the bilges. A midships tank 10.5m long has twin longitudinal bulkheads and contains oil of 1.4 m3/t to a depth of 11.5m. The tank is holed to the sea for the whole of its transverse section.  Find the new draught.

Q6. A. Describe how the force on the ship’s bottom and the GM vary when grounding takes place.

B. A ship of 8,000 tonnes displacement takes the ground on a sand bank on a falling tide at an even keel draft of 5.2 metres. KG 4.0 metres. The predicted depth of water over the sand bank at the following low water is 3.2 metres. Calculate the GM at this time assuming that the KM will then be 5.0 metres and that mean TPC is 15 tonne.

Q8. A ship 100 m long floats at a draught of 6 m and in this condition the immersed cross-sectional areas and water plane areas are as given below. The equivalent base area (Ab) is required because of the fineness of the bottom shell.

.

Calculate EACH of the following:

(a) The equivalent base area value Ab;

(b) The longitudinal position of the center of buoyancy from midships;

(c) The vertical position of the center of buoyancy above the base.

Q8: A. What is meant by the Admiralty Coefficient and the Fuel Coefficient?

B. A slip of 14900 tonne displacement has a shaft power of 4460 Kw at 14.55 knots. The shaft power is reduced to 4120 kW and the fuel consumption at the same displacement is 541 kg/h. Calculate the fuel coefficient for the ship.

Q10. A ship of 15000 tonne displacement has an Admiralty Coefficient, based on shaft power, of 420. The mechanical efficiency of the machinery is 83%, shaft losses 6%, propeller efficiency 65% and QPC 0.71. At a particular speed the thrust power is 2550kW.

Calculate:

(i) Indicated power,

(ii) Effective power,

 (iii) Ship speed.