DieselShip's Online Content Library

Q3. What is soft starting of an Induction Motor? Describe with a circuit using thyristors used for soft starting. Discuss its advantages and disadvantages. (16)

Q4. A) Explain the potential hazards if liquid-cooled transformers are used. (6)
b) What are the losses in transformers? Mention the various factors which affect these losses. In a 25 KVA, 3300/233 V, single phase transformer, the iron and full-load Cu. Losses are respectively 350 and 400 w. Calculate the efficiency at half-full load 0.8 power factor. (10)

Q5. a) List the factors that determine the starting torque of the three-phase induction motor. How does this torque generally compare with the value of the rated torque? (6)
b) The low-voltage release of an a.c. motor-starter consists of a solenoid into which an iron plunger is drawn against a spring. The resistance of the solenoid is 35 ohm. When connected to a 220 V, 50 Hz, a.c. supply the current taken is at first 2 A, and when the plunger is drawn into the “full-in” position the current falls to 0.7 A. Calculate the inductance of the solenoid for both positions of the plunger, and the maximum value of flux-linkages in weber-turns for the “full-in” position of the plunger. (10)

Q6. A) With the aid of delta and star connection diagrams, state the basic equation from which the delta-star and star- delta conversion equation can be derived. (6)
B) Three batteries A, B, and C have their negative terminals connected together. Between the positive terminals of A and B there is a resistor of 0.5 ohm and between B and C there is a resistor of 0.3 ohm
Specifications of the three batteries are given below.
Battery A 105 V, Internal resistance   0.25 ohm
Battery B 100 V, Internal resistance   0.2 ohm
Battery C   95 V, Internal resistance   0.25 ohm
Determine the current values in the two resistors and the power dissipated by them. (10)