DieselShip's Online Content Library

Q1. A. Sketch a transverse section through the hold space of a container ship hull;

B. Referring to the sketch in (A) describe how adequate structural strength is built into the hull.

Q2. Describe the following parts of a vessel and state the purposes for which they are fitted. Illustrate by means of sketches: A. Cant frames. B. Transom floor C. Panting beams D. Panting stringer

Q1. A. With the aid of a sketch describe the method of attachment for a bilge keel and hence explain what protection is made to reduce the possibility of the shell being punctured in the event of damage to the keel; B. State why the keel does not extend for the length of ship; C. Evaluate the effectiveness of bilge keels for large wall sided vessels.

Q2. A. Describe the double bottom and framing arrangement used in the machinery space to cope up with the concentrated loads and vibration, together with shaft and thrust block support.

B. Give reasons for the choice of thrust block position.

Q5. A. Adequate support is required for engine room gantry cranes. B. Sketch section through the engine room casing showing how the crane is supported by the ship structure

Q6. A. Explain the purpose of non-watertight longitudinal subdivision of tanks. B. A ship 90 long displaces 5200 tonne and floats at draughts of 4.95m forward a nd 5.35 m aft when in sea water of 1023 kg/m3. The waterplane area is 1100m2, GML 95m, LCB 0.6m forward of midships and LCF 2.2m aft of midships. Calculate the new draughts when the vessel moves into fresh water of 1002 kg/m3

Q9. (a) Describe how thrust power is determined. (6)

(b) The following information relates to a model propeller of 400mm pitch:

(i) Plot curves of thrust and torque against rev/min

(ii) When the speed of advance of the model is 150 m / min and slip 0.20, calculate the efficiency.

Q8. A. Explain why the amplitude of ship motion should be limited B. A ship of 8100 tonne displacement floats upright in seawater. KG = 7.5m and GM = 0.45m A tank, whose centre of gravity is 0.5m above the keel and 4m from the centreline, contains 100 tonne of water ballast neglecting free face effect, calculate the angle of heel when the ballast is pumped out.

Q9. A. Explain the effect of bilging a centreline compartment located away from amidships. B. A Ship of 5000 tonnes displacement enters a dry dock trimmed 0.45m by the stern. KM=7.5m., KG=6.0m. MCTC=120 tonnes-m.  The centre of flotation is 60m. Frome aft. Find the effective metacentric height at the critical instant before the ship takes the blocks overall, assuming that the transverse metacentre rises 0.075m.

Q7. A. Describe stability requirement for dry-docking. B. A ship of 8000 tonne displacement, 110m long, floats in sea water of 1.024t/m3 at draughts of 6m forward and 6.3 m aft. The TPC is 16, LCB 0.6 m aft of midships, LCF 3m aft of midships and MCT1cm 65 tonne m, the vessel now moves into fresh water of 1.000t/m3. Calculate the distance a mass of 50 tonne must be moved to bring the vessel to an even keel and determine the final draught.