Article related to Marine auxiliary machinery and systems.
Ship Auxiliary Machineries
- In: Marine Auxiliary Machinery & Systems
- Published Date
- By DieselShip
- Hits: 705
Ship Auxiliary Machineries
Machinery, other than the main propulsion unit, is usually called 'auxiliary' even though without some auxiliaries the main machinery would not operate for long. The items considered are air compressors, heat exchangers, distillation equipment, oil/water separators, sewage treatment plants and incinerators.
Air compressor
Compressed air has many uses on board ship, ranging from diesel engine starting to the cleaning of machinery during maintenance. The air...
Machinery, other than the main propulsion unit, is usually called 'auxiliary' even though without some auxiliaries the main machinery would not operate for long. The items considered are air compressors, heat exchangers, distillation equipment, oil/water separators, sewage treatment plants and incinerators.
Air compressor
Compressed air has many uses on board ship, ranging from diesel engine starting to the cleaning of machinery during maintenance. The air...
Pumps and pumping systems
- In: Marine Auxiliary Machinery & Systems
- Published Date
- By Albert Einstein
- Hits: 525
Pumps and pumping systems
At any one time in a ship's machinery space there will be a considerablevariety of liquids on the move. The lengths of pipework will cover manykilometres, the systems are often interconnecting and most pumps are inpairs. The engineer must be familiar with each system from one end tothe other, knowing the location and use of every single valve. Thevarious systems perform functions such as cooling, heating, cleaning andlubricating of the various items of...
Deck machinery and hull equipment
- In: Marine Auxiliary Machinery & Systems
- Published Date
- By Albert Einstein
- Hits: 936
Deck machinery and hull equipment
The various items of machinery and equipment found outside of the machinery space will now be described. These include deck machinery such as mooring equipment, anchor handling equipment, cargo handling equipment and hatch covers. Other items include lifeboats and liferafts, emergency equipment, watertight doors, stabilisers and bow thrusters.
The operations of mooring, cargo handling and anchor handling all involve controlled pulls or lifts using chain...
The various items of machinery and equipment found outside of the machinery space will now be described. These include deck machinery such as mooring equipment, anchor handling equipment, cargo handling equipment and hatch covers. Other items include lifeboats and liferafts, emergency equipment, watertight doors, stabilisers and bow thrusters.
The operations of mooring, cargo handling and anchor handling all involve controlled pulls or lifts using chain...
PURIFIER & CLARIFIER COMPLETE THEORY
- In: Marine Auxiliary Machinery & Systems
- Published Date
- By Ramalingam
- Hits: 2486
Definitions | Factors influencing the separation |Purification - Purifier bowl |
Clarifier - Clarifier bowl | Paring disc | Liquid seal | Selection of gravity disc |
sludge discharge | Alfa – Laval separator
Definitions
Throughput
This means the quantity of liquid supplied per unit time. The throughput is given in cu. m/h orl/h.
Reception ability
This means the largest liquid...
Auxiliaries
- In: Marine Auxiliary Machinery & Systems
- Published Date
- By Albert Einstein
- Hits: 337
Auxiliary Machines
Machinery, other than the main propulsion unit, is usually called'auxiliary' even though without some auxiliaries the main machinerywould not operate for long. The items considered are air compressors, heatexchangers, distillation equipment, oil/water separators, sewage treatment plantsand incinerators.
Air compressor
Compressed air has many uses on board ship, ranging from dieselengine starting to the cleaning of machinery during maintenance. Theair...
Machinery, other than the main propulsion unit, is usually called'auxiliary' even though without some auxiliaries the main machinerywould not operate for long. The items considered are air compressors, heatexchangers, distillation equipment, oil/water separators, sewage treatment plantsand incinerators.
Air compressor
Compressed air has many uses on board ship, ranging from dieselengine starting to the cleaning of machinery during maintenance. Theair...
HEAT EXCHANGERS
- In: Marine Auxiliary Machinery & Systems
- Published Date
- By Logeswari N
- Hits: 1747
HEAT EXCHANGERS
Flow pattern
Parallel flow contra flow or counter flow cross flow mixed flow
Contra flow or counter flow heat exchangers are those where the two fluids flow in opposite directions. (the inlet branch for the fluid passing through the tubes will be adjacent to the outlet branch on the body for the fluid circulating outside the tubes. Similarly the outlet branch for the fluid passing through the tubes will be...
More Articles...
- Boiler burners
- Rotary vane steering gear
- STEERING GEAR PARTS
- SOLENOID VALVE
- REGENERATIVE BRAKING
- MARINE ENGINE ROTATION
- NUCLEONS
- COMPRESSION IGNITION ENGINE(DIESEL CYCLE)
- REFRIGERATION CYCLE
- GAS TURBINE CYCLE
- ALTERNATING PUMPS
- SNOW MELTING SYSTEM
- MEASURING AIR HUMIDITY
- REFRIGERANTS
- DEHUMIDIFIER
- CONDENSATE PUMPING

